Hotone Ampero FS-1 Switch

The Ampero Switch is an ultra compact momentary footswitch controller designed not only for Ampero, but also for other devices with momentary footswitch controller support. Carefully selected footswitches and other components ensure comfortable switching and excellent endurance.

Ampero Switch är en ultra-kompakt tvåvägs momentär omkopplare som inte bara är designad för Ampero, utan till alla enheter med stöd för fotomkopplare. Den är tillverkad i robust metall och har noga utvalda komponenter för att tåla turnélivet.

_____

How can I use it with my Ampero?

It's quite simple: connect the TRS jack to Ampero's EXP 2/FS jack with the attached TRS cable, then enter Global menu, find EXP 2/FS sub menu, set MODE to Dual FS. After this, you can assign any function you need to the footswitches.

When we talk about a latch-type footswitch, we're referring to a kind of footswitch that remains on status once triggered on until you operate on it again. For example, a light on/off switch. Latch-type footswitch does not require continuous compression from players, which is great for switching effect pedals on/off or switching between amp channels.

Momentary footswitch is different: it remains on only as long as it is being compressed (e.g. a lighter with a press button). When you do a single press on a momentary footswitch, it will generate a short on-off "pulse", which is recognized as a "trigger" on most digital multi-effects for switching presets, tap tempo, toggling effects on/off, etc. So momentary footswitch is mainly for controlling a digital gear.

- Ultra-compact, lightweight dual-footswitch controller

- Your Ampero's best pal

- Can be used with other devices with external control jacks

- Momentary footswitch design – momentary footswitch support needed

- TRS Cable Included (80cm)