Markbass Little Mark III - Bassforsterker

The Little Mark III's solid-state preamp has a warm and natural sound, and faithfully reproduces 
the true tone of your instrument. 
The 500-wattMarkbass power amp (Markbass Proprietary Technology) supplies impeccable bass frequency reproduction.
The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you 
send to the mixer or recording unit.

INPUTS
INPUT: impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS
GAIN: -60 dB to +23 dB range
MASTER VOLUME  
LINE OUT LEVEL 
GROUND LIFT (switch on rear panel)
PRE/POST EQ (switch on rear panel)

EQUALIZATION
LOW: center frequency: 40 Hz; level: ±16 dB
LOW MID: center frequency: 360 Hz, level: ±16 dB
HIGH MID: center frequency: 800 Hz, level: ±16 dB
HIGH: center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter): center frequency 380 Hz 
VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz 

OUTPUTS
LINE OUT: balanced XLR, max. voltage 20 Vpp
EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT: unbalanced, max. voltage 2 Vpp
SPEAKER OUT: speakon/1/4" combo, 1/4" 

OTHER
WEIGHT: 5.07 lbs / 2.3 Kg
WIDTH: 10.87 in. / 27.6 cm
DEPTH: 9.84 in. / 25 cm
HEIGHT: 3.27 in. / 8.3 cm
OUTPUT POWER: 500W RMS @ 4 ohms / 300W RMS @ 8 ohms
POWER REQUIREMENT:100/120V; 230V; 240V - 50/60Hz (Voltage is factory preset according to region of sale)

Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, 
and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.
Product specifications are subject to change without notice. Rack ears do not come included with this head.