Tama Starphonic Aluminum PAL146 skarptromme

TAMA Starphonic skarptromme Aluminum – PAL146
Størrelse: 14"x 6".
Kanskje den mest delikate av alle Starphonic skarper, med ekstremt god seiderespons og varm bunn. 
PAL146 har superkontroll på overtonene uten å bli ‘’kjedelig’’ ren. I høy stemming er den super funky med tørre, 
relativt volumsvake rimshots, helt i tråd med JBs lyd-ideal. En unik funksjon er at du ikke mister seidesvar og
ghost notes, selv om trommelen er høyt stemt. PAL146 fungerer bra også i andre stemmeleier. Sett på en dempering og
stem den lavt, så blir PAL146 en mørk og dyp skarp med balladeambisjoner!
Specs:
• Størrelse: 14"x 6".
• Farge: Aluminium
• Shell: 1,2mm Seamless Aluminium.
• Sargringer: Grooved hoops. (10-hulls)
• Lugs: Freedom Lugs & Claw Hooks.
• Seide: MS20RL14C
• Seidemekanikk: ‘’Linear-Drive’’ Strainer/ Detachable Butt.
• EVANS® Heads - B14G1 Coated slagskinn, S14H30 Hazy seideskinn.

• 

  Grooved Hoop (US.PAT.NO.7825318)

  The first factor we focused on to achive a new snare drum sound was the effect of hoop. So, we carefully studied the evolution of the hoop over time.
  In doing so, we came up with an idea that combines vintage design and modern technology. That idea is the essence of our totally new "Grooved Hoop."

• 

  Super Sensitive Hi-Carbon Snappy Snare

  In order to provide a more crisp and sensitve sound, we redesigned our snappy snare, using new materials and customizing the shape of the plate and the wire coil's winding pattern. As a result of these modifications, the new "Super Sensitive Hi-Carbon Snappy Snare" fits more closely to the snare side head, demonstrating greater sensitivity and brighter, crisper sound.

• 

  Freedom Lug & Claw Hook (US.PAT.NO.7825318)

  By looseing the tension rods, you can tilt the claw hooks backwards and away from the Grooved Hoop. This quick release system offers simple, speedy replacement of drum heads without having to take all of the tension rods out of the lugs.

• 

  "Linear-Drive" Strainer (US.PAT.NO. 8017846)

  STARPHONIC's strainer uses a "Linear-Drive" system, which we designed to provide greater control of the lever adjustment arm and more precise control of the strainer's deployment motion. Even if you move the arm rapidly, you will not hear the typical "slap" of the wires hitting the bottom head. The strainer movement is designed to work in a true "linear motion", similar to the motion found on "round sproket" drum pedals. Most strainers are not designed like this and tend to speed up right before the snare wires connect with the snare side head. Also, by tilting the angle of the butt plate 30 degrees, this design holds the snare wire cords or tape more firmly and reduces unnecessary pressure on the strainer and shell.

  
  
• 

  Non-Loosening Rubber Gasket (US.PAT.NO. 7825318)

  STARPHONIC's claw hooks have a rubber block inside to prevent the tension bolts from loosening during playing. Once the tension bolt is tightened, the claw hook is pressed towards the hoop. This also presses the rubber block inside the claw hook and adds pressure to the tension rod inside.

• 

  Detachable Butt Plate

  The Detachable Strainer Butt allows you to change your snare side head, but keeps the snare wire tension in its original state. Just loosen the two screws and detach the butt plate with the snappy snares still on. When you reattach tha butt plate, the snare wire tension will be restored to its original position and calibration. The Grooved Snare Side Hoop features an open frame for simpler operation.